Laser cutter machine for fabric & leather
- Work area
- Tube power
- Max engraving speed
- Net Weight
- 1600 x 1000 mm
- 600 mm
- 2200 mm*1800 mm*1105 mm
Save up to 70% on production with laser cutting machines
Anodized lamellae helps to avoid backfiring the laser beam into the laser head or into the operator
Allows the use of different diameter and length laser tube, vertical and horizontal adjustment speeds up the alignment of the machine
The frame structure
Allows you to work with heavy materials, which at high speeds and significantly extends the life of the machines.
Two working heads
Allows you to work at high speeds without causing vibrations. Ensures uniform cutting through the entire table area.
The undoubted advantages of the Wattsan 1610 Duos Conveyer also include the conveyer type of the desktop. The open surface on all sides is mainly used for processing roll materials, which is convenient when working with fabrics or films, but the machine is also suitable for working with sheet materials.
Guarantees the cleanest cut on all types of materials, especially plywood and leather. Avoiding secondary material handling when using a standard compressor. Thanks to reinforced hose connections, the design allows for a more powerful compressor.
Nozzles are supplied in 2 modifications, for engraving and cutting
Three adjusting bolts make alignment even easier and more convenient
Provides additional nozzle adjustment
Retaining ring with plastic buffer to protect the lens
Multifunctional lens tube, compatible with three kinds of lenses
A nozzle with a small diameter hole that allows for a more powerful airflow
Polyurethane tubing that prevents the tubing from falling off the head at pressures up to 8 atmospheres, 4 times more load capacity than conventional connectors
The frame structure makes the machines Wattsan unique
High accuracy of engraving at high speeds for decades
This obliges us to make improvements not only to the machine design that increase reliability and durability, but also to the improvements aimed at different applications.
WATTSAN – getting stronger with every new customer!
All about the machine in 60 seconds
Wattsan machines are equipped with a potentiometer designed to work at power below 10%, this feature allows one to use even powerful tubes for engraving, without losing quality due to the smaller area of the laser beam.
The adjustable laser tube mounts allow the use of laser tubes of various lengths and diameters and, in combination with adjustable mirrors, facilitate machine setup and alignment.
More than 50 improvements have been made to the design of Wattsan machines
Сonnector to nozzle
Location of belts
Polyurethane air supply tubes
Chain for table lifting and lowering
Belt reduction gear
Correct position of stepper motors
Proper design prevents bursting, even at high pressures
Belts are positioned over the gantry for easy maintenance and to prevent heat during cutting
Withstands up to 8 atmospheres of bursting pressure.
Protects the moving parts of the lift and lowering table from the ingress of small residues
In combination with an asynchronous motor, the load on the working table is up to 80 kg, no misalignment of the table in the horizon.
The combination of a three-phase stepper motor with a 4:1 belt reducer allows you to get high engraving quality up to 2500 DPI.
The stepper motor is centered on the shaft on the Y-axis for even load distribution, which greatly increases its service life and accuracy in the production of small parts.
We take a set of measures for the trouble-free operation of Wattsan machines