laser engraving machine

Laser cutter engraver machine for wood 1290
ST

  • Work area
  • Tube power
  • Max engraving speed
  • Dimensions
  • Net Weight
  • 1200 x 900 mm
  • 100-120 W
  • 700 mm
  • 1790x1410x670 mm + 315 mm (if on its wheels)
  • 368 kg
In stock

Save up to 70% on production with laser cutting machines

Wattsan 1290 ST wide format laser machine is designed for cutting and mass production of products from non-metallic materials.

The device provides high-precision machining with positioning accuracy up to 0.01 mm, easy to use and durable.

Anodized lamellae helps to avoid backfiring the laser beam into the laser head or into the operator

Universal mounts

Allows the use of different diameter and length laser tube, vertical and horizontal adjustment speeds up the alignment of the machine

The frame structure makes Wattsan machines unique

The machine frame removes vibrations, especially during engraving, since the greatest moment of inertia is achieved during engraving. It is important to remember the accuracy of the machine.

The increased thickness of the body is designed to reduce vibrations arising during engraving.

On Wattsan machines, the body thickness is 2.9 mm or higher on machines such as 1610 and larger. The additional thickness of the frame body increases the service life of the machine and its problem-free operation.

Trash collection compartment

Protects the lifting mechanism from small particles, as well as giving additional rigidity to the structure

Enhanced Portal

Allows you to work at high speeds without causing vibrations. Ensures uniform cutting through the entire table area.

Reduced area nozzle

Guarantees the cleanest cut on all types of materials, especially plywood and leather. Avoiding secondary material handling when using a standard compressor. Thanks to reinforced hose connections, the design allows for a more powerful compressor.

Nozzles are supplied in 2 modifications, for engraving and cutting

Mirror mount

Three adjusting bolts make alignment even easier and more convenient

Clamping bolt

Provides additional nozzle adjustment

Retaining ring

Retaining ring with plastic buffer to protect the lens

Tube

Multifunctional lens tube, compatible with three kinds of lenses

Nozzle

A nozzle with a small diameter hole that allows for a more powerful airflow

Tube holder

Polyurethane tubing that prevents the tubing from falling off the head at pressures up to 8 atmospheres, 4 times more load capacity than conventional connectors

    The frame structure makes the machines Wattsan unique

    Frame construction
    Hull thickness
    The frame of the machine relieves vibration, especially during engraving, because the greatest moment of inertia is achieved during engraving.

    It is important to keep in mind the accuracy of the machine as well.
    The increased enclosure thickness is designed to reduce vibration during engraving.

    Wattsan machines have an enclosure thickness of 2.9 mm or greater on machines like the 1610 and larger.
    The extra enclosure thickness increases machine life and performance.

    High accuracy of engraving at high speeds for decades

    Enhanced Portal
    3M belts
    The reinforced portal seriously affects the accuracy of the machine, the lack of vibrations, durability, the speed of movement and the inertia of the equipment.
    3M belts with increased tooth size are used; such belts serve longer and are not prone to abrasion. The material of the belts is especially important, unlike poleuritan belts, the 3M belts prevent the occurrence of a coin cut since no flapping occurs during stretching.

    WATTSAN machines work all over the world

    This obliges us to make improvements not only to the machine design that increase reliability and durability, but also to the improvements aimed at different applications.

    The world's largest jigsaw puzzle client. 30% of plywood puzzles are made on Wattsan machines.
    Eliminates fouling on the back side of the material. Anodized lamellas eliminate beam blast to the back side of the material.
    Coin Cut. The 4:1 belt reducers and 3M belts eliminate coin cutting!
    Engraving leather with a long lens. For better leather engraving, use a long lens, longer distance to the material less blowing.
    The use of two types of nozzles when working with plywood. The truncated nozzle increases blowing, improving the quality of the cut, reducing the cost of the product by 30%.
    The speed of engraving in large production runs. The reinforced gantry allows high engraving quality at high speed.

    WATTSAN – getting stronger with every new customer!

    All about the machine in 60 seconds

    Laser tube power rheostat and universal mounting

    Wattsan machines are equipped with a potentiometer designed to work at power below 10%, this feature allows one to use even powerful tubes for engraving, without losing quality due to the smaller area of the laser beam.

    The adjustable laser tube mounts allow the use of laser tubes of various lengths and diameters and, in combination with adjustable mirrors, facilitate machine setup and alignment.

    More than 50 improvements have been made to the design of Wattsan machines

    Сonnector to nozzle

    Location of belts

    Polyurethane air supply tubes

    Mechanical protection

    Chain for table lifting and lowering

    Belt reduction gear

    Correct position of stepper motors

    etc.

    Proper design prevents bursting, even at high pressures

    Belts are positioned over the gantry for easy maintenance and to prevent heat during cutting

    Withstands up to 8 atmospheres of bursting pressure.

    Protects the moving parts of the lift and lowering table from the ingress of small residues

    In combination with an asynchronous motor, the load on the working table is up to 80 kg, no misalignment of the table in the horizon.

    The combination of a three-phase stepper motor with a 4:1 belt reducer allows you to get high engraving quality up to 2500 DPI.

    The stepper motor is centered on the shaft on the Y-axis for even load distribution, which greatly increases its service life and accuracy in the production of small parts.

    We take a set of measures for the trouble-free operation of Wattsan machines

    Service support
    Startup and training
    All Wattsan engineers undergo mandatory annual training in order to quickly resolve any issues.
    Wattsan provides annual machine operation and maintenance training for all partners around the world. We launch and train more than 100 clients monthly.

    The machine is suitable for materials

    01 Plywood

    02 Wood

    03 Plexiglass

    04 Stone

    05 Glass

    06 Rubber

    07 Leather

    Technical
    characteristics

    Dimensions
    Net Weight
    368 kg
    Optics
    Laser power
    100-120 W
    Engraving depth
    3 mm
    Max. cutting thickness
    10-13 mm
    Mirror Diameter
    25 mm
    ZnSe lens
    ZnSe D20
    Focus distance
    50 mm
    Laser tube lifetime
    10000 h
    Mechanics
    Working surface
    Blade table
    Cutting speed
    0-500 mm/s
    Engraving Speed
    0-700 mm/s
    Positioning precision
    0,03 mm
    Laser cooling
    Water
    Power
    220 ±10% 50Hz
    Power consumption
    640 W
    Through table
    Yes. (Y-axis)
    Structure of the axis Y
    Linear guide AMT PMI MSB 15S
    Structure of the axis X
    Linear guide AMT PMI MSB 15S
    Engine on X and on Y
    57-H350CS / SH
    Software
    RDL (LaserWork 8)
    File transfer
    Wifi, Lan, USB
    Control system
    RuiDa RD6445
    Laser tube
    RECI, LASEA
    CorelDraw, Photoshop, AutoCAD
    BMP, GIF, JPG, TIFF, PLT, CDR, DXF, AI, SVG

      Logistics
      We will deliver the equipment according to the requirements convenient for you:

      It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

      We are responsible for transportation from the factory to the indicated destination. Hence, all documents related to it are under our responsibility, such as way bill, invoice, packing list.

      If you want to organize the delivery, it is beter to find a local logistics company in advance before goods are ready for shipment.

      Technical
      characteristics

      Dimensions
      Net Weight
      368 kg
      Optics
      Laser power
      100-120 W
      Engraving depth
      3 mm
      Max. cutting thickness
      10-13 mm
      Mirror Diameter
      25 mm
      ZnSe lens
      ZnSe D20
      Focus distance
      50 mm
      Laser tube lifetime
      10000 h
      Mechanics
      Working surface
      Blade table
      Cutting speed
      0-500 mm/s
      Engraving Speed
      0-700 mm/s
      Positioning precision
      0,03 mm
      Laser cooling
      Water
      Power
      220 ±10% 50Hz
      Power consumption
      640 W
      Through table
      Yes. (Y-axis)
      Structure of the axis Y
      Linear guide AMT PMI MSB 15S
      Structure of the axis X
      Linear guide AMT PMI MSB 15S
      Engine on X and on Y
      57-H350CS / SH
      Software
      RDL (LaserWork 8)
      File transfer
      Wifi, Lan, USB
      Control system
      RuiDa RD6445
      Laser tube
      RECI, LASEA
      CorelDraw, Photoshop, AutoCAD
      BMP, GIF, JPG, TIFF, PLT, CDR, DXF, AI, SVG
      Get help or create a request.