Laser Cleaning Machine Wattsan
CW

  • Laser source
  • Cooling system
  • Welding head weight
  • Fiber length
  • Control
  • Types of cleaning patterns
  • 1500, 2000, 3000 W (JPT/Raycus)
  • Water
  • 0.78 kg
  • 8 m
  • Relfar-(V2/V3) RuiDa
  • Line (━)

Laser Cleaning 1500W/2000W/3000W

The Wattsan continuous manual laser cleaning machine is a floor-standing machine for removing shallow organic and inorganic contaminants from surfaces. With rapid heat dissipation and low substrate damage requirements, the machine effectively cleans large steel structures, pipes and more. Continuous laser cleaning removes rust, paint, varnish layers from metal products and other coatings or deposits, degreases the surface, removes the effects of oxidation or carbon deposits.

User-friendliness

Training requires no prior skills or knowledge and takes only a few hours. Neither special protective clothing nor a camera in the workshop are needed to work at the machine. Preparation for cleaning takes up to 5 minutes.

Relfar-(V2/V3) RuiDa

For ease of use, each cleaning parameter group can be numbered. This allows you to rapidly change them when processing different sorts of materials. The line’s width ranges from 0 to 300 mm, allowing you to clean both small and large things.

Light and handy gun

The cleaning gun weighs 0.78 kg. The gun’s little weight is essential for the operator when cleaning steep buildings or standing at heights for extended periods of time—even in awkward positions.

JPT or Raycus laser source

The machine is equipped with a JPT fiber source. Other laser sources, such as Raycus, can be installed upon customer request. The source has high single pulse energy, uniform energy distribution, easy to operate and maintain. Suitable for processing in automobile manufacturing, marine industry, petrochemical industry, etc.

TEYU water cooling

The chiller is built-in, making transportation easy. This also allows for continuous operation because the machine does not need to be turned off for rest.

    Continuous cleaning is 2 times faster than impulse cleaning

    Continuous cleaning
    Pulse cleaning
    Continuous lasers are an excellent solution for large metal structures or pipes where rapid heat removal is required and minor damage to the base material is acceptable. Continuous laser cleaning is more cost-effective than pulsed laser cleaning. It quickly removes surface contaminants: rust, paint, especially on large areas.
    Pulsed laser cleaning removes thick contaminants from various materials, even non-metals. It does so precisely and delicately. It is often used for applications where maintaining product integrity is important, such as cleaning molds or thin materials that are sensitive to high temperatures. With adjustable pulse duration while maintaining peak power, this device allows for flexible customization of operations.

    Wattsan welding & cleaning machines are completed with well-known brands

    TEYU water cooling system
    Laser sources with options
    The water cooling unit prevents the equipment from overheating by evenly dissipating heat. Water cooling is useful for both continuous and pulsed laser sources. Even in hot weather, it cools efficiently and quietly. It works well at high power for a variety of tasks.
    For Wattsan welding and cleaning machines, you can choose a laser source such as Raycus or JPT. If you are on a tight budget and stable, high power operation is important, Raycus is a great option. The JPT with its adjustable pulse parameters may be better for precision welding where control over heat input is critical. JPT is also an excellent option for more precise cleaning.

    Wattsan Laser Cleaning Machine

    HANDHELD LASER CLEANING MACHINE | WATTSAN 300W PULSED

    Local cleaning of non-removable parts without stopping production!

    The interface has an electronic display with settings and preset cleaning parameters. There you will also find on/off buttons, an emergency stop button, etc.

    The simple interactive control system allows you to contain treatment libraries for different types of contamination. In the parameter settings you can adjust the scanning speed up to 20,000 mm/s, frequency, utilization rate and scanning area up to 300 mm² as well as the laser power. Several languages to choose from: Chinese, English, German, Turkish, Russian, etc.

    Advantages of Wattsan laser cleaning machines

    User-friendliness

    Relfar-(V2/V3) RuiDa control system

    Light and handy Relfar gun

    JPT or Raycus laser source

    TEYU water cooling

    Training requires no prior skills or knowledge and takes only a few hours. Neither special protective clothing nor a camera in the workshop are needed to work at the machine. Preparation for cleaning takes up to 5 minutes.

    For ease of use, each cleaning parameter group can be numbered. This allows you to rapidly change them when processing different sorts of materials. The line's width ranges from 0 to 300 mm, allowing you to clean both small and large things.

    The cleaning gun weighs 0.78 kg. The gun's little weight is essential for the operator when cleaning steep buildings or standing at heights for extended periods of time—even in awkward positions.

    The machine is equipped with a JPT fiber source. Other laser sources, such as Raycus, can be installed upon customer request. The source has high single pulse energy, uniform energy distribution, easy to operate and maintain. Suitable for processing in automobile manufacturing, marine industry, petrochemical industry, etc.

    The water cooling unit prevents the equipment from overheating by evenly dissipating heat. Water cooling is useful for both continuous and pulsed laser sources. Even in hot weather, it cools efficiently and quietly. It works well at high power for a variety of tasks.

    We take comprehensive measures to ensure the trouble-free operation of Wattsan machines!

    Service support
    Start-up and training
    All Wattsan engineers undergo compulsory annual training, in order to resolve any issues quickly.
    Wattsan conducts annual training on machine operation and maintenance for all partners worldwide. We run and train more than 100 customers every month.

    01 Stainless steel

    02 Mild steel

    03 Aluminum

    04 Copper

    Technical
    characteristics

    Hardware
    Control
    Relfar-(V2/V3) RuiDa
    Types of cleaning patterns
    Line (━)
    Welding head/Scanner MODEL
    RelFar FWH20-C20A
    Scanning speed
    ≦20000 mm/s
    Cleaning head weight
    0.78 kg
    Protective lens
    4
    Focal length
    F800 mm
    Scan width range
    300 mm
    Scan length range
    300 mm
    Dimensions
    Machine size
    1075x664x1055 mm
    Packing size
    1400x860x1200 mm
    Weight
    235 kg
    Fiber length
    8 m
    Input voltage
    380 VAC, 50 HZ
    Operating temperature range
    5-40 ℃
    Operating humidity range
    30-70 %
    Laser source
    Laser source
    JPT/Raycus
    Laser wavelength
    1080 nm
    Laser power
    1500/2000/3000 W
    Cooling
    Water
    Operating mode
    Continuous-wave
    Laser frequency
    up to 20kHz
    Control System
    RuiDa
    Laser cleaning gun
    Relfar
    Laser sources
    JPT, Raycus
    Electrical system
    Siemens

      Logistics
      We will deliver the equipment according to the requirements convenient for you:

      It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

      We are responsible for transportation from the factory to the indicated destination. Hence, all documents related to it are under our responsibility, such as way bill, invoice, packing list.

      If you want to organize the delivery, it is beter to find a local logistics company in advance before goods are ready for shipment.

      Technical
      characteristics

      Hardware
      Control
      Relfar-(V2/V3) RuiDa
      Types of cleaning patterns
      Line (━)
      Welding head/Scanner MODEL
      RelFar FWH20-C20A
      Scanning speed
      ≦20000 mm/s
      Cleaning head weight
      0.78 kg
      Protective lens
      4
      Focal length
      F800 mm
      Scan width range
      300 mm
      Scan length range
      300 mm
      Dimensions
      Machine size
      1075x664x1055 mm
      Packing size
      1400x860x1200 mm
      Weight
      235 kg
      Fiber length
      8 m
      Input voltage
      380 VAC, 50 HZ
      Operating temperature range
      5-40 ℃
      Operating humidity range
      30-70 %
      Laser source
      Laser source
      JPT/Raycus
      Laser wavelength
      1080 nm
      Laser power
      1500/2000/3000 W
      Cooling
      Water
      Operating mode
      Continuous-wave
      Laser frequency
      up to 20kHz
      Control System
      RuiDa
      Laser cleaning gun
      Relfar
      Laser sources
      JPT, Raycus
      Electrical system
      Siemens

      Contact