Technical
characteristics

Dimensions
Working area
4000х2000 mm
Machine size
10731х3660х2435 mm
Net Weight
8000 kg
Optics
Laser head
Precitec/Raytools/WSX
Laser power
3-20 kW
Mechanics
Engine power Z
750 W
Engine power XY
1300/3000 W
Gearboxes
NIDEC-SHIMPO / MOTOREDUCTEUR
Structure of the axes XY
Guides HIWIN / Helical rack LEAN, 25 mm / 35 mm
Structure of the axes Z
HIWIN Guides 20 mm / Ball Screws 25 mm
Height sensor
Automatic capacitive
Lubrication system
Automatic centralised, semi-automatic
Max. travel speed
100/120 m/min
Max. operating speed
Depends on the material
Additional gas
Oxygen, nitrogen, air, argon
Auto change table
Yes
Bed
Software
FSCUT 2000S
Power electrics
Siemens
Repositioning accuracy
±0.02 mm
Height control system
BCS100
Type of end sensors
High precision inductive
Working temperature
10-40 °C
Type of emitter
IPG/Raycus/MAX Photonics
Laser power adjustment
Programmatic

Fiber Laser Metal Cutting Machine 4020
Hard

  • Work area
  • Laser power
  • Travel speed
  • Laser emitter
  • Working area
  • Machine size
  • 4000 x 2000 mm
  • 3-20 kW
  • 100-120 m/min
  • Raycus / MAX Photonics / IPG
  • 4000х2000 mm
  • 10731х3660х2435 mm
In stock

A combination of technology and the best solutions in one!

Highest cutting quality by combining the best components and engineering solutions.

The main purpose of a laser metal cutter is to cut metal at high speed with the best possible result without the need for further processing. The highest precision, reliability and model quality make Wattsan laser metal cutters in demand all over the world.

Frame

Wattsan Hard frames are heavier and have stronger load-bearing capacity (compared to similar cutting machines from 6000 to 20000 W). All frames are made by multi-stage heat treatment during the day, followed by milling.

Gantry

Wattsan HARD machines use over-large section aluminium gantries.

Aluminium gantry over a large section is a good hardness, rigidity with light weight, as well as resistance to corrosion and oxidative processes. Thanks to the aluminium gantry and the design precisely calculated by our engineers, the machine is completely insured against deformations and breakages.

Protective cabin with air filtration

The fully enclosed design of the cabin protection of the machine is equipped with an internal smoke extraction and air filtration system. It allows you to keep the air in the production room clean and provides additional safety for operators.

Video monitoring

Camera 1 broadcasts the operation of the machine inside the cabin to the operator’s monitor.

Camera 2 is used at monitoring the work of interchangeable tables. With its help, the operator can see the operation of the machine “behind the cabin”, which ensures both the safety of the mechanism and the safety of other operators in the production.

Control system

Wattsan Hard metal cutters are designed with The FSCUT 2000S control system. It consists of controllers and CYPCUT software. The controller is completed with the display with the liquid crystal screen and the control panel.

Advantages of Wattsan Metal Cutters

Wattsan machines use laser heads from the most popular manufacturers Raytools, WSX, Precitec.

QBH connector

The most common connection standard for most sources worldwide.
Other connectors are possible.

Safety glasses

Protective glass protects expensive collimator optics from dust, dirt and sparks. The lower safety glass is the main consumable; the upper glass is rarely replaced.

Collimator lens

Ensures the beam is parallel before it enters the focusing lens. Should not be changed more than once a year or when servicing the laser head.

Focusing module with position controller

Dynamic focal length variation during operation, to ensure optimum plunge cuts and quality cuts.

Cooling

Water-cooled laser head for critical components: collimator, focus.

Inductive sensor

Ensures that the nozzle height is always precisely maintained above the material6, which in turn ensures a stable cut, regardless of the curvature of the material.




    Servomotors and portal work at high speed

    Portal
    Servomotors
    Wattsan machines use a specially designed extruded aluminium gantry. It has high strength characteristics and low weight.
    Mitsubishi servomotors are reliable, quiet and affordable. They offer high power and low vibration in a compact size.

    Several types of frames are available

    Frame standard
    Frame hard
    Manufactured for metal cutters with travel speeds of up to 80 metres per minute. The wall thickness of the frame is 8 to 10 mm. There is a reinforcing rib every 400 mm. The frame is heat-treated to ensure a long service life. Machine frame warranty is for 8 years. Used in basic models with work field sizes 1010, 1313, 1325 and 1530. Ventilation beam system with holes of different diameters for uniform fume extraction during cutting.
    Manufactured for metal cutters with a travel speed of 100 to 160 metres per minute. The wall thickness is 12 to 16 mm. Every 400 mm sheet is reinforced inside the frame. The frame is heat treated to stabilize the metal. Frame has a 10 year warranty. Used in machines with working field sizes from 1313 to 2060, used in configurations with an auto-shift or with a pipe cutting module. It has a number of features such as pneumatic flaps for efficient smoke removal during cutting, protection from powerful radiation, preparation for upgrading and others. The frame construction is extremely robust and durable.

    Modes

    Knowing the cutting conditions is our job. With the right cutting modes, you can cut faster, without additional processing, or simply save on materials.

    A special strategy for machining an array of coaxial holes. Reduced machining time, reduced gas consumption. Particularly relevant for the production of ventilated products and perforated enclosures.
    Cutting sharp corners without burnout by means of loops on the edges of the product. Allows you to produce products with sharp corners even when cutting thicker materials.
    Sheet location function. Speeds up the search and start of work by automatically locating the edge of the sheet.
    Compensates for the width of the cut. Required to obtain parts according to the drawing, the function takes the width of the beam into account and compensates for it.
    Common cutting line. Saves cutting time and material, as it does not go over the same cutting point twice.

    Wattsan metal cutters are quality components put together by our designers based on feedback from customers and service engineers around the world.

    All about the machine in 15 seconds

    High working speed

    Hiwin guide rails/screws are the most reliable and affordable worldwide. High-speed ball screws for fast response of the metal curvature tracking system.

    Planetary gears. Nidec-Shimpo withstands high inertia loads with high fail-safe operation.

    Advantages of Wattsan laser metal cutters

    Laser heads from various manufacturers

    Servomotors

    Machine frame modifications

    Emitters

    Control system

    Smoke extraction system

    Gantry

    Cooling system




      Depending on source power and application, we equip machines with Raytools, Precitec, WSX laser heads.

      We switched to Mitsubishi servomotors because they are widespread and extremely reliable.

      The machine frames are designed to perform their tasks with reserve and to last longer than conventional machines.

      IPG, Raycus, Max Photonics. High power factor, easy maintenance, long service life, high efficiency/cost ratio.

      One of the most polarized systems in the world. Extensive functionality, combined CAD and CAM, high fault tolerance, easy to use.

      Efficient smoke evacuation is achieved by automatic pneumatic flaps. Treatment products are evacuated from the area above the laser head.

      Unique gantry configuration, aluminium alloy, low weight. Allow for high speeds and acceleration.

      We use products from world leader S&A. A chiller is needed to maintain the required operating temperature of the laser head and source. With an accuracy of +- 0.5 °C.

      We take comprehensive measures to ensure the trouble-free operation of Wattsan machines!

      Service support
      Start-up and training
      All Wattsan engineers undergo compulsory annual training, in order to resolve any issues quickly.
      Wattsan conducts annual training on machine operation and maintenance for all partners worldwide. We run and train more than 100 customers every month.

      The machine can process

      01 Aluminum

      02 Steel

      03 Stainless steel

      04 Brass

      05 Copper

      Technical
      characteristics

      Dimensions
      Working area
      4000х2000 mm
      Machine size
      10731х3660х2435 mm
      Net Weight
      8000 kg
      Optics
      Laser head
      Precitec/Raytools/WSX
      Laser power
      3-20 kW
      Mechanics
      Engine power Z
      750 W
      Engine power XY
      1300/3000 W
      Gearboxes
      NIDEC-SHIMPO / MOTOREDUCTEUR
      Structure of the axes XY
      Guides HIWIN / Helical rack LEAN, 25 mm / 35 mm
      Structure of the axes Z
      HIWIN Guides 20 mm / Ball Screws 25 mm
      Height sensor
      Automatic capacitive
      Lubrication system
      Automatic centralised, semi-automatic
      Max. travel speed
      100/120 m/min
      Max. operating speed
      Depends on the material
      Additional gas
      Oxygen, nitrogen, air, argon
      Auto change table
      Yes
      Bed
      Software
      FSCUT 2000S
      Power electrics
      Siemens
      Repositioning accuracy
      ±0.02 mm
      Height control system
      BCS100
      Type of end sensors
      High precision inductive
      Working temperature
      10-40 °C
      Type of emitter
      IPG/Raycus/MAX Photonics
      Laser power adjustment
      Programmatic




        Logistics
        We will deliver the equipment according to the requirements convenient for you:

        It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

        It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

        It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

        Get help or create a request.


          alt