Fiber Laser Metal Cutting Machine 1530
S Rotatory Tablechange Cabin

  • Work area
  • Laser power
  • Travel speed
  • Laser emitter
  • Working area
  • Machine size
  • 1500 x 3000 mm
  • up to 6 kW
  • 100-120 m/min
  • Raycus / MAX Photonics / IPG
  • 1500х3000 mm
  • 8500х3580х2200 mm
In stock

A combination of technology and the best solutions in one!

Highest cutting quality by combining the best components and engineering solutions.

The main purpose of a laser metal cutter is to cut metal at high speed with the best possible result without the need for further processing. The highest precision, reliability and model quality make Wattsan laser metal cutters in demand all over the world.

Rotatory device

Rotatory device is intended for cutting pipes of any configuration, round and square cross-section. The tool is designed for cutting stainless steel, steel plates and pipes, galvanized steel sheets, aluminum, brass and other thin metal materials.

Protective cabin

It is designed to protect against reflected radiation and sparks during cutting. Cabin can be installed on any Wattsan metal cutter. And according to safety regulations, cabin must be installed on machines with an emitter power of 2000 W or more.

Tablechange system

The table change system allows for continuous operation of the machine and does not waste machine time on loading and unloading products.

Frame

The frame of all Wattsan metal cutters undergoes forced annealing to relieve stress. Frame design and machine wall thickness depend on the type of metal cutting machine. Frame processing (milling, grinding, fastening of rail guides and helical racks) is carried out by robotic complexes.

Reinforced gantry

Depending on the machine modification, we offer gantries in different materials.

Servo motors & gearbox

Mitsubishi servo motors and Shimpo planetary gearboxes. It provides high speed operation without heating for a long time. Besides high reliability, they are the most common and easy-to-maintain machine tool components worldwide.

Laser sources

IPG, Raycus, Max Photonics are world leaders in laser source manufacturing that delivers the best results, which is why we choose these brands.

Control panel

For your convenience, we offer several options for machine control stands. Each type of control terminal is equipped with an LCD display and a control panel.

Advantages of Wattsan Metal Cutters

Wattsan machines use laser heads from the most popular manufacturers Raytools, WSX, Precitec.

QBH connector

The most common connection standard for most sources worldwide.
Other connectors are possible.

Safety glasses

Protective glass protects expensive collimator optics from dust, dirt and sparks. The lower safety glass is the main consumable; the upper glass is rarely replaced.

Collimator lens

Ensures the beam is parallel before it enters the focusing lens. Should not be changed more than once a year or when servicing the laser head.

Focusing module with position controller

Dynamic focal length variation during operation, to ensure optimum plunge cuts and quality cuts.

Cooling

Water-cooled laser head for critical components: collimator, focus.

Inductive sensor

Ensures that the nozzle height is always precisely maintained above the material6, which in turn ensures a stable cut, regardless of the curvature of the material.

    Servomotors and portal work at high speed

    Portal
    Servomotors
    Wattsan machines use a specially designed extruded aluminium gantry. It has high strength characteristics and low weight.
    Mitsubishi servomotors are reliable, quiet and affordable. They offer high power and low vibration in a compact size.

    Several types of frames are available

    Frame standard
    Frame hard
    Manufactured for metal cutters with travel speeds of up to 80 metres per minute. The wall thickness of the frame is 8 to 10 mm. There is a reinforcing rib every 400 mm. The frame is heat-treated to ensure a long service life. Machine frame warranty is for 8 years. Used in basic models with work field sizes 1010, 1313, 1325 and 1530. Ventilation beam system with holes of different diameters for uniform fume extraction during cutting.
    Manufactured for metal cutters with a travel speed of 100 to 160 metres per minute. The wall thickness is 12 to 16 mm. Every 400 mm sheet is reinforced inside the frame. The frame is heat treated to stabilize the metal. Frame has a 10 year warranty. Used in machines with working field sizes from 1313 to 2060, used in configurations with an auto-shift or with a pipe cutting module. It has a number of features such as pneumatic flaps for efficient smoke removal during cutting, protection from powerful radiation, preparation for upgrading and others. The frame construction is extremely robust and durable.

    Modes

    Knowing the cutting conditions is our job. With the right cutting modes, you can cut faster, without additional processing, or simply save on materials.

    A special strategy for machining an array of coaxial holes. Reduced machining time, reduced gas consumption. Particularly relevant for the production of ventilated products and perforated enclosures.
    Cutting sharp corners without burnout by means of loops on the edges of the product. Allows you to produce products with sharp corners even when cutting thicker materials.
    Sheet location function. Speeds up the search and start of work by automatically locating the edge of the sheet.
    Compensates for the width of the cut. Required to obtain parts according to the drawing, the function takes the width of the beam into account and compensates for it.
    Common cutting line. Saves cutting time and material, as it does not go over the same cutting point twice.

    Wattsan metal cutters are designed on feedback from customers and service engineers around the world.

    All about the machine in 15 seconds

    High working speed

    Hiwin guide rails/screws are the most reliable and affordable worldwide. High-speed ball screws for fast response of the metal curvature tracking system.

    Planetary gears. Nidec-Shimpo withstands high inertia loads with high fail-safe operation.

    Advantages of Wattsan laser metal cutters

    Laser heads from various manufacturers

    Servomotors

    Machine frame modifications

    Emitters

    Control system

    Smoke extraction system

    Gantry

    Cooling system

    Depending on source power and application, we equip machines with Raytools, Precitec, WSX laser heads.

    We switched to Mitsubishi servomotors because they are widespread and extremely reliable.

    The machine frames are designed to perform their tasks with reserve and to last longer than conventional machines.

    IPG, Raycus, Max Photonics. High power factor, easy maintenance, long service life, high efficiency/cost ratio.

    One of the most polarized systems in the world. Extensive functionality, combined CAD and CAM, high fault tolerance, easy to use.

    Efficient smoke evacuation is achieved by automatic pneumatic flaps. Treatment products are evacuated from the area above the laser head.

    Unique gantry configuration, aluminium alloy, low weight. Allow for high speeds and acceleration.

    We use products from world leader S&A. A chiller is needed to maintain the required operating temperature of the laser head and source. With an accuracy of +- 0.5 °C.

    We take comprehensive measures to ensure the trouble-free operation of Wattsan machines!

    Service support
    Start-up and training
    All Wattsan engineers undergo compulsory annual training, in order to resolve any issues quickly.
    Wattsan conducts annual training on machine operation and maintenance for all partners worldwide. We run and train more than 100 customers every month.

    The machine can process

    01 Aluminum

    02 Steel

    03 Stainless steel

    04 Brass

    05 Copper

    Technical
    characteristics

    Dimensions
    Working area
    1500х3000 mm
    Machine size
    8500х3580х2200 mm
    Packing size
    10000х3300х1800 mm
    Net Weight
    5500 kg
    Optics
    Laser head
    Raytools/Precitec/WSX
    Laser power
    up to 6 kW
    Mechanics
    Engine power Z
    400 W
    Engine power XY
    1500 W*2+1000W+1500W*3
    Gearboxes
    NIDEC-SHIMPO
    Structure of the axes XY
    Guides HIWIN / Helical rack LEAN / Leitesen
    Structure of the axes Z
    HIWIN Guides / Ball Screws
    Height sensor
    Automatic capacitive
    Lubrication system
    Automatic centralised, semi-automatic
    Max. travel speed
    100-120 m/min
    Max. operating speed
    Depends on the material
    Additional gas
    Oxygen, nitrogen, air, argon
    Auto change table
    No
    Bed
    Software
    FS-3000S
    Power electrics
    Siemens
    Repositioning accuracy
    ±0.02 mm
    Height control system
    BCS100
    Type of end sensors
    Inductive
    Working temperature
    10-40 °C
    Type of emitter
    Raycus / MAX Photonics / IPG
    Laser power adjustment
    % 10-100
    Software
    FSCUT
    Laser head
    RAYTOOLS
    Laser source
    IPG
    Motors
    MITSUBISHI
    Rails
    HIWIN

      Logistics
      We will deliver the equipment according to the requirements convenient for you:

      It is our obligation to deliver the goods to the location selected by the buyer, and we are responsible for all the transportation costs and risks related to the delivery.

      We are responsible for transportation from the factory to the indicated destination. Hence, all documents related to it are under our responsibility, such as way bill, invoice, packing list.

      If you want to organize the delivery, it is beter to find a local logistics company in advance before goods are ready for shipment.

      Technical
      characteristics

      Dimensions
      Working area
      1500х3000 mm
      Machine size
      8500х3580х2200 mm
      Packing size
      10000х3300х1800 mm
      Net Weight
      5500 kg
      Optics
      Laser head
      Raytools/Precitec/WSX
      Laser power
      up to 6 kW
      Mechanics
      Engine power Z
      400 W
      Engine power XY
      1500 W*2+1000W+1500W*3
      Gearboxes
      NIDEC-SHIMPO
      Structure of the axes XY
      Guides HIWIN / Helical rack LEAN / Leitesen
      Structure of the axes Z
      HIWIN Guides / Ball Screws
      Height sensor
      Automatic capacitive
      Lubrication system
      Automatic centralised, semi-automatic
      Max. travel speed
      100-120 m/min
      Max. operating speed
      Depends on the material
      Additional gas
      Oxygen, nitrogen, air, argon
      Auto change table
      No
      Bed
      Software
      FS-3000S
      Power electrics
      Siemens
      Repositioning accuracy
      ±0.02 mm
      Height control system
      BCS100
      Type of end sensors
      Inductive
      Working temperature
      10-40 °C
      Type of emitter
      Raycus / MAX Photonics / IPG
      Laser power adjustment
      % 10-100
      Software
      FSCUT
      Laser head
      RAYTOOLS
      Laser source
      IPG
      Motors
      MITSUBISHI
      Rails
      HIWIN
      Get help or create a request.